Oil seal 35x47x7mm (used for back wheel Vespa GS150 / GS3) svendita

In the case of the rear wheel seal of the Vespa engines, a shaft seal ring seals the brake drum against the transmission oil on the engine side. If the ring leaks, it runs not only into the brake drum but from there also onto the tyre. Both are very unpleasant situations that must be avoided for safety reasons. Therefore the shaft seal should always be in a perfect condition. During an inspection, the running surface of the oil seal should always be inspected both in the ring itself and on the shaft. A common assembly error is dry assembly. In this case the sealing lip of the rotary shaft seal can turn over and throw off the tube spring. The sealing effect is then extremely minimized. Do not use grease or oil for assembly. This does not bind any abrasive dirt particles locally. br />oil seal with the dimensions: 35x47x7mm >/p>

is used for the wheel side in the motor housing of the Vespa GS150 motors. br /> >em>AI-translation >/em>>/sub>>/p>